Click on image to enlarge                

Problem:   Obtain full definition of a headliner from a fifteen-passenger van. Size was not of concern due to the large volumes achievable with our portable equipment.

Process:   The process began by designing a fixture to hold the headliner to prevent any deformation. In order to achieve complete 3-Dimensional definition the part was digitized in multiple orientations, which were later associated together into the same coordinate system.

Solution:   The measured ‘point-cloud data’ was overlaid with the original CAD model to identify any areas out of the specified tolerance zone. From these easy to read reports the manufacture can determine if this was a functional or non-functional part.